O/W Skin Protection Cream 11.2
Hydrior AG
Preparation:
Weight in all ingredients for the oil phase and heat up to approx. 80 °C. while stirring and add it without stirring into the aqueous phase at 70 - 80 °C. Mix it shortly at 70 °C. Homogenize with a rotor/stator system at approx. 10'000 rpm for three minutes. Add the perfume after cooling down to approx. 25 °C. and homogenize it for one minute. Remark: Add Carbopol® after preparation of the aqueous phase during intensive stirring. Degas the mixture with vacuum if possible.Disclaimer
While every effort has been made to reproduce these formulations correctly, the Publisher of this website cannot accept any liability for the information presented. All formulations are provided in good faith, but no warranty is given as to accuracy of information or results, or suitability for a particular use, nor is freedom from patent infringement to be inferred. Formulations are offered solely for consideration by the participating manufacturers. Continued use of this web site infers acceptance of this disclaimer.
Latest Issues
At ROELMI HPC, we transcend industry standards, paving the way for innovation and excellence in the world of well-being and beyond.
We strongly focus our activity on the research, design and production of innovative actives and functional ingredients to offer sustainable solutions through an ethical and responsible choice.
IFSCC Congress 2025
Palais des Festivals, Cannes
15th - 18th September 2025
SEPAWA Congress 2025
ECC Estrel Center, Berlin
15-17th October 2025
