NATURECARE FACIAL FLUID
Preparation:Heat phase A and phase B separately to 80-85°C. Add phase B to phase A while stirring. Homogenise with suitable dispersion unit (e.g. Ultra Turrax) at 60°C. Add phase C at 40°C. If necessary, adjust the pH and stop stirring at 30°C
Notes:Properties pH-value (as is): 5.2- 5.8 Viscosity: 4000 mPa·s (Brookfield RVF, 23 °C, spindle 4, 10 rpm Suppliers 1 Cognis 2 CP Kelco
While every effort has been made to reproduce these formulations correctly, the Publisher of this website cannot accept any liability for the information presented. All formulations are provided in good faith, but no warranty is given as to accuracy of information or results, or suitability for a particular use, nor is freedom from patent infringement to be inferred. Formulations are offered solely for consideration by the participating manufacturers. Continued use of this web site infers acceptance of this disclaimer.