Preparation:Disperse white pigment into macadamia oil under stirring with a Rayneri. (Adjust speed to obtain a vortex) – Disperse Covathick 2009 into the water phase under stirring with a Rayneri. – Premix pigments of phase C with a coffee mill and add them to phase B under stirring with a rayneri. Once dispersed, mix For 1 minute with an ultra-turrax at 13,500 rounds per minutes. Add phase D to combined phase BC under stirring with the Rayneri. Heat phase A and combined phase BCD to 60°C. Be careful not to overheat. Quickly add combined phase BCD into phase A under moderate stirring (a too high shear may develop a little bit the colour). Add Phase E under stirring with a Rayneri. Continue stirring for 5 minutes. Pour into the final packaging at between 50°C and 55°C.
Notes:Supplier 1 LCW
While every effort has been made to reproduce these formulations correctly, the Publisher of this website cannot accept any liability for the information presented. All formulations are provided in good faith, but no warranty is given as to accuracy of information or results, or suitability for a particular use, nor is freedom from patent infringement to be inferred. Formulations are offered solely for consideration by the participating manufacturers. Continued use of this web site infers acceptance of this disclaimer.