EXFOLIATING SKIN TREATMENT LOTION J1/83A
Preparation:Procedure: Heat water to 65°C. Pre-mix Butylene Glycol and Keltrol and add to the water phase. Mix until dissolved. Add the other ingredients of phase A one at a time and mix well. Cool to 50°C. In the oil phase tank, add the JEESILC IDD, JEESILC CPS-211 and JEESILC PDS-100 and mix until uniform. Using a homogeniser, add phase B to phase A and mix for 10 minutes. Cool to 40°C. Switch to prop agitation. Add the ingredients of phase C one at a time into the main tank and mix well after each addition. Pre-mix phase D in a side vessel and add to the main tank. Mix well. Add in phase E and mix well. Adjust pH to 4.5 – 5.0 with citric acid. Properties JEESILC® IDD is a high-molecular weight silicone polymer which deposits on a breathable film on the skin. JEESILC® 6056 is a 60% active silicone emulsion of a dimethyl polysiloxane gum. The microbiological integrity of this product is protected with a non-paraben preservative – JEECIDE® CAP-5.
Notes:Supplers 1 Kelco 2 JEEN International Corp. 3 Active Concepts 4 Botanicals Plus! 5 Carrubba 6 Seppic
While every effort has been made to reproduce these formulations correctly, the Publisher of this website cannot accept any liability for the information presented. All formulations are provided in good faith, but no warranty is given as to accuracy of information or results, or suitability for a particular use, nor is freedom from patent infringement to be inferred. Formulations are offered solely for consideration by the participating manufacturers. Continued use of this web site infers acceptance of this disclaimer.