Shake, Shower & Shave
Preparation:
1. Combine glycerin and aqua then slowly add Condicare PQ10-4 and mix until all powder is dispersed and clear (A). 2. Begin heating to 45 - 50°C. 3. Slowly add Maltodextrin (B) and mix until fully dissolved. 4. Add Iselux® LQ-CLR-SB (C) and mix until uniform. 5. Add Empigen® BS/FA (D) and mix until uniform. 6. Remove from heat. 7. When below 40°C add phase. 8. Add fragrance and dye and mix until fully emulsified. 9. Adjust pH to 5.5 - 6.0 with 50% w/w citric acid solution. 10. Dispense formulation into bottles with mixing to avoid phase separation prior to filling.Notes:
Shake well before use and apply to wet skin in the shower. Lather up on the skin and rinse with water. Appearance: Clear multi-phase liquid: clear blue phase ~50% volume, clear colorless phase ~50% volume pH: 5.5 - 6.0 (mix well immediately before measuring). Viscosity*: 300 – 600 cps (mix well immediately before measuring). Stability: Passed 12 weeks at 45ºC, 20ºC and 5ºC and 3 F/T cycles *Brookfield RVT @ 20rpm, 20ºC, #3 spindle ADisclaimer
While every effort has been made to reproduce these formulations correctly, the Publisher of this website cannot accept any liability for the information presented. All formulations are provided in good faith, but no warranty is given as to accuracy of information or results, or suitability for a particular use, nor is freedom from patent infringement to be inferred. Formulations are offered solely for consideration by the participating manufacturers. Continued use of this web site infers acceptance of this disclaimer.
Featured Supplier
Founded in 1964, Sederma became a member of the Croda International Group in 1997. Sederma is dedicated to the development of active ingredients and in the creation of innovative concepts for Cosmetics, based on the mastery of biotechnology, fine chemistry and vegetal extraction.Located near Paris, all Sederma activities, from R&D and manufacturing...