Luscious Lemon Jelly Wash

Fun, lemon jelly foaming cleanser for bath or shower. A sulfate-free, mild and gentle jelly texture body wash that has a luscious lemon scent, perfect if you desire a fun-to-use bath time or shower product. This formulation uses Pureact Gluco D which is a 100% naturally derived, sulfate-free surfactant. A thick jelly texture foaming shower gel featuring Pureact WS Conc and Pureact Gluco D with acrylate polymers to provide an unusual jelly texture with no pick up.
Phase
Product
INCI Name
Supplier
Volume
A
Aqua
q.s to 100
Carbpol EDT 2020
Acrylates (and) C10-C30 Alkyl Acrylate Cross Polymer
Lubrizol
2.0
Yellow 5
CI19140
Sensient
0.0001
Glycerin
3.0
B
Pureact WS Conc
Sodium Methyl Cocoyl Taurat
Innospec
10.0
C
Iselux®
Sodium Lauroyl Methyl Isethionate
Innospec
3.75
Natrlquest® E30
Trisodium Ethylenediamin Disuccinate
Innospec
0.35
D
Pureact Gluco D
Decyl Glucoside
Innospec
8.00
E
Sodium Hydroxide (25% w/w)
q.s to pH 6.5-7.0
F
Empigen® BS/H50
Cocamidopropyl Betaine
Innospec
10.0
G
Lamesoft PO 65
Coco-Glucoside (and) Glyceryl Oleate
BASF
1.50
H
Sodium Benzoate
0.5
Phenoxyethanol
0.5
Benzyl Alcohol
0.3
I
Paradise Lemon
Fragrance
Azure Fragrances
0.5
J
Citric Acid
q.s to pH 5.0-5.5

Preparation:

1. In main vessel, slowly add Carbopol ETD 2020 to vortex of high mixing water. Mix for 30 mins until fully dispersed and no lumps observed. 2. Add dyes and glycerin and mix until uniform, then heat batch to 50°C (perform under vacuum and de-aerate after dispersing Carbopol EDT 2020) (A). 3. Heat and pre mix Pureact WS Conc and add to main vessel mix until uniform (B). 4. Slowly add Natrlquest® E30 and Iselux® in aliquots and mix until flakes have fully dissolved (C). 5. Add Pureact Gluco D and mix until uniform (D). 6. Adjust pH to 6.5-7.0 with 25% sodium hydroxide solution (note significant increase in viscosity) (E). 7. Slowly add Empigen BS/H50 and mix until uniform (F). 8. Slowly add Lamesoft PO 65 and mix until uniform (G). 9. Remove from heat and add preservative and fragrance and mix until uniform (H, I). 10. Adjust pH to pH 5.0-5.5 with 50% w/w citric acid solution (J).

Notes:

Properties Appearance: Yellow high viscosity slightly hazy jelly pH: 5.0 – 5.5 Viscosity*: 150,000 – 175,000 cps Stability: Passed 12 weeks, 45°C, 25°C 5°C, 3 F/T cycles *Brookfield DV-E @ 20rpm, 20ºC, #6 spindle
Disclaimer

While every effort has been made to reproduce these formulations correctly, the Publisher of this website cannot accept any liability for the information presented. All formulations are provided in good faith, but no warranty is given as to accuracy of information or results, or suitability for a particular use, nor is freedom from patent infringement to be inferred. Formulations are offered solely for consideration by the participating manufacturers. Continued use of this web site infers acceptance of this disclaimer.