Natural Jet Setter Eco Wash

96% naturally derived and mild – ideal for skin. Formulated with sulfate-free ingredients this skin wash provides gentle cleansing and is mild to skin and eyes. The multi-functional properties make it suitable to be used as a hand wash, body wash or a facial wash making it a go to product when travelling. Just one body cleanser is needed in your travel bag.
Phase
Product
INCI Name
Supplier
Volume
A
Aqua
q.s. to 100.00 (48.65%)
Jaguar Excel
Guar Hydroxpropyltrimonium Chloride
Solvay
0.05
Citric Acid
q.s. to pH 4.0-4.5
B
Empigen® BS/FA
Cocamidopropyl Betaine
Innospec
13.0
C
Aqua
30.00
D
Disolvine GL-38
Tetrasodium Glutamate Diacetate
Nouryon
0.20
Iselux® SCMI
Sodium Cocoyl Methyl Isethionate
Innospec
1.50
Pureact MS-CG
Sodium Methyl Oleoyl Taurate
Innospec
3.00
Pureact Gluco C
Coco-Glucoside
Innospec
4.50
E
Illicium Verum Fruit Oil
Star Anise Essential Oil
0.20
F
Sodium Benzoate
0.50
Benzyl Alcohol
0.40
G
Citric Acid
q.s to pH 5.5-6.0

Preparation:

1. Add Jaguar Excel to aqua with mixing (mix until fully dispersed). 2. Add trace amounts of citric acid solution to low pH to 4.0-4.5 to hydrate and swell guar (A). 3. Add Empigen® BS/FA and mix until uniform (B). 4. In separate vessel heat aqua in phase C to 45-50°C and the sequentially add ingredients in phase D and mix until clear and uniform, remove from heat. (note Pureact MS-CG and Pureact Gluco C need homogenizing by heating to 35-40°C and mixing before addition to the vessel). 5. Add phase C/D to A/B and mix until clear and uniform. 6. Add essential oil and mix until fully emulsified (E). 7. Add preservatives in phase (F) and mix until fully uniform and clear. 8. Adjust to pH to pH 5.5-6.0 with 50% citric acid solution as required (G).

Notes:

Good to formulate Special combination of Innospec ingredients used in this skin wash to offer an economical formulation. Pureact MS-CG is formulated with Iselux® SCMI to build viscosity and to boost flash foam speed and reduce the levels of active required for effective performance. This allows for a significant reduction in the amount of active required to save natural resources. This product offers a foam performance and skin feel that is better than 18% active CAPB and Glucoside formulations. The skin wash achieves high viscosity without the need for additional polymeric or natural rheology modifiers. Tips and tricks for usage Massage pea size dose on desired area – face, hands or body – and lather up. You only need a small amount to make lots of bubbles. Appearance: Clear viscous liquid pH: 5.5 – 6.0 Surfactant active: ~8.3% Total Solids: ~11% Viscosity*: 6,000 – 10,000 cPs Stability: Passed at 12 weeks 45°C, 20°C and 5°C and 3 F/T cycles * Brookfield RV #3, 10 rpm, 20°C
Disclaimer

While every effort has been made to reproduce these formulations correctly, the Publisher of this website cannot accept any liability for the information presented. All formulations are provided in good faith, but no warranty is given as to accuracy of information or results, or suitability for a particular use, nor is freedom from patent infringement to be inferred. Formulations are offered solely for consideration by the participating manufacturers. Continued use of this web site infers acceptance of this disclaimer.