Discover Green Body Cleanser
Preparation:1. In main vessel add aqua and conditioner, mix until fully dispersed and clear heat to 45ºC (A). 2. Sequentially add ingredients in (B) and mix until uniform and clear*. Then remove from heat. *(Pureact WS Conc, Pureact MS-CG & Pureact Gluco L need to be heated and homogenized before addition to vessel) 3. Slowly add Empigen® BS/FA to main vessel and mix until uniform (C). 4. Add sodium benzoate and mix until fully dissolved (D). 5. Add fragrance and mix until fully emulsified and clear (E). 6. Adjust pH to 4.8-5.2 with citric acid solution (50%w/w) as required (F). 7. Add aliquots of sodium chloride, (0.4%w/w) as required, until viscosity of 8,000-12,000cps obtained (G).
Notes:Good for the environment This body cleanser meets all the trends in todays’ market as it is >95% naturally derived according to ISO 16128. Good to formulate A body cleanser formulated with sulfate-free ingredients. Tips and tricks for usage Massage pea size dose on desired area and lather up. You only need a small amount to make lots of bubbles! Appearance: Viscous liquid pH: 4.8 – 5.2 Viscosity*: 8,000 – 12,000 cPs Stability: Passed at 12 weeks 45°C, 20°C, 5°C and 3 F/T cycles *Brookfield RV, # 5 @20 rpm, 20ºC
While every effort has been made to reproduce these formulations correctly, the Publisher of this website cannot accept any liability for the information presented. All formulations are provided in good faith, but no warranty is given as to accuracy of information or results, or suitability for a particular use, nor is freedom from patent infringement to be inferred. Formulations are offered solely for consideration by the participating manufacturers. Continued use of this web site infers acceptance of this disclaimer.