SOFT EXFOLIATING CLEANSER
Lucas Meyer Cosmetics by Clariant
Preparation:
1. Prepare phase A. 2. Sprinkle Siligel™ into the phase A under high stirring during 5 minutes (rotor stator homogenizer). 3. Add phase C under slow stirring to avoid entrapment of air bubbles. 4. Add D, E (ingredients one by one) and F under slow stirring until the product is homogeneous. 5. Adjust pH if necessary.Notes:
Aspect: Translucent gel with purple beads Viscosity (Brookfield, LV, spindle 3, 6 rpm, 1 min): 10 000 - 20 000 mPa.s pH: 5.0 - 5.5 Preservative efficacy test: Done Pilot batches 48 kg Stability Tests: On lab batches up to 3 kg Up to 1 month at 50°C Up to 3 months at: Room Temperature, 4-8°C and 45°C Freeze thaw cycles (24h at -18°C and 24h at RT - 2 weeks) Centrifugation (3000 rpm, 20 min): Stable Vibrating table (400 rpm, 4h): StableDisclaimer
While every effort has been made to reproduce these formulations correctly, the Publisher of this website cannot accept any liability for the information presented. All formulations are provided in good faith, but no warranty is given as to accuracy of information or results, or suitability for a particular use, nor is freedom from patent infringement to be inferred. Formulations are offered solely for consideration by the participating manufacturers. Continued use of this web site infers acceptance of this disclaimer.
Latest Issues
DERMACLAIM – COSMETIC TESTING LABORATORY
Dermaclaim Lab is a Dermocosmetic Testing Laboratory focused on the Substantiation of Efficacy Claims for active ingredients and end-products, through in vitro bioassays and clinical testing in human volunteers.
Our R&D testing services help you to demonstrate the efficacy of your...
Connex-C Asia 2025
Lee Kong Chian School of Medicine - Ong Tiong Tat and Irene Tan Liang Kheng Auditorium 11 Mandalay Road, Level 4, Singapore 308232
31 July - 1 August 2025
IFSCC Congress 2025
Palais des Festivals, Cannes
15th - 18th September 2025