Clean & Clear Face Primer

BRB International BV

Clean & Clear Face Primer is a clear silicone-in-water emulsion. Clean & Clear Face Primer is used as a make up base to provide long lasting make up.

Phase

Product

INCI Name

Supplier

Volume

Viscolam AT 100

Sodium Polyacryloyldimethyl Taurate (and) Hydrogenated Polydecene (and) Trideceth-10

Lamberti

2.00

BRB SG 106

Cyclopentasiloxane (and) Dimethicone/ Vinyl Dimethicone Crosspolymer

BRB

29.00

DI Water

Aqua

28.56

Propylene Glycol

Dow Chemical

39.44

BRB 526

PEG-12 Dimethicone

BRB

0.50

Phenochem

Methylparaben (and) Ethylparaben (and) Propylparaben (and) Butylparaben (and) Phenoxyethanol

Sharon Laboratories

0.50

Preparation:

1) Mix A1 and A2. Measure refractive index of phase A. 2) Premix B1-B3. Measure refractive index of phase B. Match the refractive of two phases. Add DI water into phase B to decrease refractive index or add Propylene Glycol to increase refractive index. 3) Then, add premix slowly into step 1. Then, homogenize well. 4) Add C1 into bulk and mix well.

Notes:

Typical properties / Additional information Appearance Clear Gel Viscosity at 25°C (spindle 6, speed 20) cPs 40,000 pH 6.0-7.0 Sensory attributes Silky and elegant feel after dry Please note that this formulation has passed 3 months stability at 45°C. The Product Safety Data Sheets for BRB products should be obtained from your BRB office prior to use. ATTENTION: Before handling, read product information, Product Safety Data Sheets and container labels for safe use, and any physical and/or health hazard information. BRB SG 106: Provide excellent velvet and intense after feel. Also help to build up viscosity. BRB 526: Act as surface tension depressant and wetting agent.

Disclaimer

While every effort has been made to reproduce these formulations correctly, the Publisher of this website cannot accept any liability for the information presented. All formulations are provided in good faith, but no warranty is given as to accuracy of information or results, or suitability for a particular use, nor is freedom from patent infringement to be inferred. Formulations are offered solely for consideration by the participating manufacturers. Continued use of this web site infers acceptance of this disclaimer.

Latest Issues

Featured Supplier

At CLR, we have the consumer in mind right from the start of the development of our active ingredients. We analyze which skin problems consumers have and develop solutions. Our aim is not to serve short-lived trends, but to improve people’s well-being and quality of life. With all our expertise, we create active ingredients that are highly...

Learn more »