PROTECTING DAY CREAM
Lucas Meyer Cosmetics by Clariant
Preparation:
Manufacturing Procedure: 1. Heat A and D up to 70-75°C. 2. Add premix B into A and stir until the gel is fully developed. 3. Add C into AB. 4. Keep ABC at 70-75°C under slow stirring for 20 minutes to hydrate phospholipids. 5. Add D into ABC under medium stirring and keep stirring rate for 5 minutes to emulsify. 6. Increase stirring rate up to maximum level for 3 minutes to homogenize the emulsion. 7. Cool down under medium stirring. 8. Blend E until the phase is homogeneous. 9. Add E, F, G and H below 40°C. 10. Adjust the pH if necessary.Notes:
Formula Specifications: Aspect: Pink cream Viscosity (Rheo ELV 8, spindle 4, 6 rpm, 3 min): 20 000 - 30 000 mPa.s pH: 5.0 - 5.5 Centrifugation (3000 rpm, 20 min): Stable * = Distributed in France by Lucas Meyer Cosmetics and Unipex Solutions.Disclaimer
While every effort has been made to reproduce these formulations correctly, the Publisher of this website cannot accept any liability for the information presented. All formulations are provided in good faith, but no warranty is given as to accuracy of information or results, or suitability for a particular use, nor is freedom from patent infringement to be inferred. Formulations are offered solely for consideration by the participating manufacturers. Continued use of this web site infers acceptance of this disclaimer.
Latest Issues
Vantage Specialty Ingredients, formerly Lipo Chemicals, is the personal care unit of Vantage Specialty Chemicals, offering a wide array of specialty, basic, and naturally derived ingredient solutions to marketers of formulated skin and hair care products.
Founded in 1962 and acquired by Vantage Specialty Chemicals in 2010, Vantage s is a...
in-cosmetics Latin America 2024
São Paulo, Brazil
25th - 26th September 2024
IFSCC 2024
Recanto das Cataratas Thermas Resort, Iguazu Falls, Brazil
14th - 17th October 2024
