Preparation:Manufacturing Procedure: 1. Add ingredients of phase A and mix slowly until completely dissolved. 2. Prepare B: heat B up to 70-75°C. Keep under strong stirring for 20 minutes to hydrate phospholipids. Cool down under medium stirring. 3. Add B into A under slow stirring. 4. Add C (ingredients one by one) and D. 5. Adjust viscosity with sodium chloride if necessary. 6. Adjust the pH if necessary.
Notes:Formula Specifications: Aspect: Beige opalescent fluid gel Viscosity (Rheo ELV 8, spindle 4, 6 rpm, 3 min): 10 000 - 20 000 mPa.s pH: 5.0 - 5.5 Centrifugation (3000 rpm, 20 min): Stable * = Distributed in France by Lucas Meyer Cosmetics and Unipex Solutions.
While every effort has been made to reproduce these formulations correctly, the Publisher of this website cannot accept any liability for the information presented. All formulations are provided in good faith, but no warranty is given as to accuracy of information or results, or suitability for a particular use, nor is freedom from patent infringement to be inferred. Formulations are offered solely for consideration by the participating manufacturers. Continued use of this web site infers acceptance of this disclaimer.