TINTED BB CREAM NO. 1744

This lightly tinted cream provides even skin tone and UV protection. Jojoba Buttercreme™ nourishes the skin and provides the combined benefits of Shea and Jojoba butters. BioPolymer BHA-10 provides substantive moisturization.
Phase
Product
INCI Name
Supplier
Volume
A
Deionized Water
66.27
Tetrasodium EDTA
0.10
Liponic® EG-1(1)
Glycereth-26
3.00
UltraThix® P-100 (8)
Acrylic Acid/VP Crosspolymer
0.40
Preservative
qs
B
BYO-I2 (55)
Iron Oxides (C.I. 77492) (and) Isopropyl Titanium Triisostearate
0.75
Liponyl® 601 BN SPEC (1)
Mica (and) Boron Nitride
3.00
BTD 401 (55)
TiO2 (and) Isopropyl Titanium Triisostearate
5.75
BRO-I2 (55)
Iron Oxides (C.I. 77491) (And) Isopropyl Titanium Triisostearate
0.15
BBO-I2 (55)
Iron Oxides (C.I. 77499) (And) Isopropyl Titanium Triisostearate
0.08
C
Lipomulse® Luxe (1)
Cetearyl Alcohol (and) Glyceryl Stearate (and) PEG-40 Stearate (and) Ceteareth-20
5.00
Jojoba Buttercreme™ (144)
Butyrospermum Parkii (Shea Butter) (and) Jojoba Alcohol (and) Potassium Jojobate (and) Simmondsia Chinensis (Jojoba) Butter (and) Propanediol
4.00
Parsol® MCX (133)
Octymethoxy cinnimate or Octinoxate
7.50
Liponate® ISA(1)
Isostearic Acid
1.50
Vitamin E Acetate
Tocopheryl Acetate
0.50
D
Biopolymer BHA-10 (1)
Polyquaternium-10 (and) Hyaluronic Acid
2.00

Preparation:

1. In the main kettle, disperse Ultrathix® P-100 into Sequence 1 with rapid mixing, mix for 15 minutes or until free of lumps, then heat to 70°C to 75°C. 2. Grind/Blend Sequence 2 until uniform, then add to Sequence 1 while rapid mixing. 3. In a separate vessel, heat Sequence 3 to 75-80°C and mix well. Slowly add Sequence 3 to Sequence 1 with medium mixing until a smooth emulsion is formed. 4. Start to cool. Continue mixing on medium speed, scraping sides often. 5. Add Sequence 4, when temperature is at or below 35°C, continue mixing and cooling to 25°C.

Notes:

(1) Lipo Chemicals, Inc. (8) Ashland (55) Kobo (133) DSM (144) Lipo Chemicals – Desert Whale Jojoba SPECIFICATIONS: pH: 6.0 ± 0.3 Viscosity: 430,000 cps ± 10% (RVT/TE/0.6RPM) Stability: 1 month at 50°C
Disclaimer

While every effort has been made to reproduce these formulations correctly, the Publisher of this website cannot accept any liability for the information presented. All formulations are provided in good faith, but no warranty is given as to accuracy of information or results, or suitability for a particular use, nor is freedom from patent infringement to be inferred. Formulations are offered solely for consideration by the participating manufacturers. Continued use of this web site infers acceptance of this disclaimer.