Antipollution Skin Face MAS018-08-01
Hallstar Italia Srl
Preparation:
Prepare phase A and phase B separately. Warm each to 75°C–80°C. Add phase B to phase A at 70°C–75°C, homogenizing using a suitable dispersion unit, such as Silverson, Ultra Turrax, etc. Cool batch to 40°C under gentle agitation. Add phase C and homogenize using a suitable dispersion unit.Notes:
PROPERTIES: APPEARANCE: Very shiny and soft cream, good spreadability, silky after-feel VISCOSITY: 11,000 – 15,000 mPa?s (20 rpm, Brk. RVDV-E, Sp. 5, after 24 h at room temperature) pH: 5.5 – 6.0 SUPPLIERS: 1 Sigma Aldrich 2 ACEF 3 Solvay Novecare 4 HallStar Italia 5 BASF 6 Stearinerie Dubois 7 MerckDisclaimer
While every effort has been made to reproduce these formulations correctly, the Publisher of this website cannot accept any liability for the information presented. All formulations are provided in good faith, but no warranty is given as to accuracy of information or results, or suitability for a particular use, nor is freedom from patent infringement to be inferred. Formulations are offered solely for consideration by the participating manufacturers. Continued use of this web site infers acceptance of this disclaimer.
Latest Issues
At The FOREFRONT
Everything started at the forefront of sea explorations, between the Varde and Grouin headlands, on the edge of Brittany, a vantage point that affords broad views and a look out to sea. The sea is at the same time our source of inspiration and our primary source of creation.
At the forefront of innovation, we never stop...
IFSCC Congress 2025
Palais des Festivals, Cannes
15th - 18th September 2025
SEPAWA Congress 2025
ECC Estrel Center, Berlin
15-17th October 2025