Sprayable Lotion Base With Polyaldos™ JS001-197B

Phase
Product
INCI Name
Supplier
Volume
A
Deionized Water
qs
Glycerin
4.00
SeaPure™ Agarose
Agarose
0.10
Carbopol™ ULTREZ-10*
Carbomer
Lubrizol
0.15
B
Polyaldo™ 10-1-S (Pastillated)
Polyglyceryl-10 Stearate
0.60
Polyaldo™ 10-2-P (Pastillated)
Polyglyceryl-10 Dipalmitate
0.30
Polyaldo™ 10-1-O KFG (NON GMO)
Polyglyceryl-10 Oleate
4.80
Polyaldo™ DGDO KFG (NON GMO) 10-10-O
Polyglyceryl-10 Decaoleate
0.30
Aldo™ MCT KFG
Caprylic/Capric Triglyceride
4.50
Dicaprylyl Carbonate
4.50
C
TEA 99
Triethanolamine
0.15
D
Mikrokill™ COS
Phenoxyethanol (and) Caprylyl Glycol (and) Chlorphenesin
0.75

Preparation:

1. Heat Phase A in the main batch to 75°C, slowly add Carbopol ULTREZ-10, and mix well. 2. Heat Phase B to 75°C, mix well. 3. Add Phase B premix to Phase A, mix and begin cooling. 4. Add Phase C to the main batch. 5. At a temperature of 45°C or below add Phase D. Mix well.

Notes:

Appearance: White Thin Lotion pH: 6.5 - 7.0 Viscosity: 3,000 - 7,000 cps Mean (Average) Particle Size: 4.885µm
Disclaimer

While every effort has been made to reproduce these formulations correctly, the Publisher of this website cannot accept any liability for the information presented. All formulations are provided in good faith, but no warranty is given as to accuracy of information or results, or suitability for a particular use, nor is freedom from patent infringement to be inferred. Formulations are offered solely for consideration by the participating manufacturers. Continued use of this web site infers acceptance of this disclaimer.