Anti-Aging Care With Ronacare® Isoquercetin (O/W) MDA-A-20-07
Merck KGaA
Preparation:
Combine phases A and B seperately and heat to 80°C. Add phase A to phase B while stirring. Homogenize. Add phase C at ~ 60°C. Add dissolved phase D (warm up to 40-50°C). Add phase E at 40°C. Adjust pH to 5.0-5.5.Notes:
Aspect: Yellowish soft creampH value (22°C): 5.4Viscosity: 22000 mPa.s (Brookfield model DV- II+, Helipath spindle C, 10 rpm) at 22°C Suppliers: (1) Seppic (2) Sasol Germany GmbH (3) BASF AG (4) Gattefossé GmbH (5) Merck KGaA, Darmstadt, Germany / EMD ChemicalsDisclaimer
While every effort has been made to reproduce these formulations correctly, the Publisher of this website cannot accept any liability for the information presented. All formulations are provided in good faith, but no warranty is given as to accuracy of information or results, or suitability for a particular use, nor is freedom from patent infringement to be inferred. Formulations are offered solely for consideration by the participating manufacturers. Continued use of this web site infers acceptance of this disclaimer.
Latest Issues
At CLR, we have the consumer in mind right from the start of the development of our active ingredients. We analyze which skin problems consumers have and develop solutions. Our aim is not to serve short-lived trends, but to improve people’s well-being and quality of life. With all our expertise, we create active ingredients that are highly...
IFSCC Congress 2025
Palais des Festivals, Cannes
15th - 18th September 2025
SEPAWA Congress 2025
ECC Estrel Center, Berlin
15-17th October 2025
