Tinted Broad Spectrum SPF 15, PFA (PPD) 8+ Sunscreen Formula CAB5-248C2M2 (Batch JCH11-76-1)

Hallstar
Phase
Product
INCI Name
Supplier
Volume
A
HallBrite® OS USP
Ethylhexyl Salicylate [Octisalate]
5.0000
HallBrite® BHB
Ethylhexyl Salicylate [Octisalate]
3.0000
HallStar® GC
Caprylic/Capric Triglyceride
2.2500
Neo Heliopan® 303
Octocrylene [Octocrylene]
2.7500
Polycrylene®
Polyester-8
3.0100
-
Benzyl Alcohol
0.5000
B
AS-5131
Iron Oxides [Yellow], Triethoxycaprylylsilane
0.1167
AS-5126
Iron Oxides [Red], Triethoxycaprylylsilane
0.0380
AS-5146
Iron Oxides [Black], Triethoxycaprylylsilane
0.0140
C
Neo Heliopan® BB
Benzophenone-3
0.4900
Parsol® 1789
Butyl Methoxydibenzoylmethane [Avobenzone]
3.0000
D
Brij® S721
Steareth-21
1.0000
Brij® S2
Steareth-2
0.3500
(HallStar® TA-1618 Cetearyl Alc
Cetearyl Alcohol
0.3500
Performa V® 1608 LM
C30-38 Olefin/Isopropyl Maleate/MA Copolymer
0.8000
-
Potassium Cetyl Phosphate, Hydrogenated Palm Glycerides
3.000
E
Deionized
Water
54.5913
F
(Versene® 220 Crystals
Tetrasodium EDTA
0.1000
G
Tris Amino
Tromethamine
0.0400
H
-
Butylene Glycol [1,3-]
2.0000
-
Glycerin
3.0000
-
Phenoxyethanol, Methylparaben, Ethylparaben
Simulgel 600
Acrylamide/Sodium Acryloyldimethyltaurate Copolymer, Isohexadecane, Polysorbate 80
0.6000
I
-
Cyclopentasiloxane
4.0000
Vlvesil
Cyclopentasiloxane, C30-C45 Alkyl Cetearyl Dimethicone Crosspolymer
4.5000
J
Dry-Flo® PC
Aluminum Starch Octenylsuccinate
2.5000

Preparation:

In secondary vessel combine 1-6, start mixing, add 7, 8, and 9, and when uniform add 10 and 11. [Note: additional processing required to properly disperse 7, 8, and 9.] Then heat this oil phase to 90°C. Add 12 through 16 in order with continued mixing of oil phase. To the main vessel add 17, start mixing, add 18 and, when dissolved, add 19. Heat this water phase to 87°C. In a separate vessel combine 20, 21 and 22, mix to homogeneity, and then add to the water phase just prior to combining oil and water phases. When oil and water phases are uniform and at the defined temperatures, add the oil phase to the water phase with continued mixing. After ten minutes switch to homogenization and start slow cooling. When the batch reaches 55°C, stop homogenizing and resume sweep mixing. When the batch is at 50°C add 23. In a separate vessel combine 24 and 25, mix until homogeneous, and then add to batch. When the batch is again uniform add 26. Continue cooling and stirring until a smooth, homogeneous lotion and at the desired filling temperature. Perform final quality assurance checks.

Notes:

PRODUCT CHARACTERISTICS (25°C) Appearance: Tan colored soft cream pH: 6.3 Viscosity (RV, T-D, 5, 20 & 100 rpm; cP): 63000, 22400 & 6800
Disclaimer

While every effort has been made to reproduce these formulations correctly, the Publisher of this website cannot accept any liability for the information presented. All formulations are provided in good faith, but no warranty is given as to accuracy of information or results, or suitability for a particular use, nor is freedom from patent infringement to be inferred. Formulations are offered solely for consideration by the participating manufacturers. Continued use of this web site infers acceptance of this disclaimer.

Latest Issues

in-cosmetics Korea 2024

Hall C, Coex, Seoul, South Korea
24th - 26th July 2024

in-cosmetics Latin America 2024

São Paulo, Brazil
25th - 26th September 2024