LIP STICK WITH MOISTURIZING PCA-ESTER
Zschimmer & Schwarz Italiana S.p.A.
Preparation:
Phase A: Melt waxes and oils at about 100°C. Add phase B and homogenise briefly with a stirrer, use the rotor/stator just for 1 minute. Evacuate to remove bubbles. Cool to about 78°C and pour in metal moulds. Cool about 5 minutes at 25°C and another 5-8 minutes at about 4-8°C and remove from the form.Notes:
Supplier 1 Kahl Wax 2 ISP 3 Dr Straetmans 4 Jan Dekker 5 Uniqema 6 GE Silicones 7 Sun Chemical 8 Bell-EuropeDisclaimer
While every effort has been made to reproduce these formulations correctly, the Publisher of this website cannot accept any liability for the information presented. All formulations are provided in good faith, but no warranty is given as to accuracy of information or results, or suitability for a particular use, nor is freedom from patent infringement to be inferred. Formulations are offered solely for consideration by the participating manufacturers. Continued use of this web site infers acceptance of this disclaimer.
Latest Issues
At CLR, we have the consumer in mind right from the start of the development of our active ingredients. We analyze which skin problems consumers have and develop solutions. Our aim is not to serve short-lived trends, but to improve people’s well-being and quality of life. With all our expertise, we create active ingredients that are highly...
NYSCC Suppliers' Day 2025
Javits Center, New York
3rd - 4th June 2025
17th Sun Protection Conference 2025
Royal College of Physicians, London
24 - 25 June 2025