IN CONTROL (OIL CONTROL LOTION)
Presperse LLC
Preparation:
Combine phase A in a main kettle and heat to 78-80°C. Combine phase B in a separate vessel and heat to 78-80°C. Slowly add phase B to phase A with prop mixing (medium-high speed, 78-80°C) Continue mixing for 3-5 minutes or until batch is homogeneous. Slowly add phase C to combined phase AB, continue mixing for additional 1-3 minutes or until batch is homogeneous. Cool batch with prop mixing (low speed, 35°C). Check pH, adjust to 4-7 using NaOh (18%) solution. At 35°C, add Phase E in the listed order to batch and prop mix (low speed) for 2-3 minutes or until batch homogeneous. Cool batch to 25°C.Notes:
Properties Appearance: Semi-solid white emulsion. Odour: Characteristic. pH: 5.5-7 Viscosity (LVT#4 @12 rpm): 40,000 – 80,000 cps Suppliers 1 Jeen International Corp. 2 Botanigenics, Inc. 3 CP Kelco 4 Presperse LLC 5 ISP Inc. 6 Lipo Chemical 7 Croda Inc. 8 Micro Powders 9 JGC Catalysts & Chemical Ind. 10 Bioland 11 Biotech MarineDisclaimer
While every effort has been made to reproduce these formulations correctly, the Publisher of this website cannot accept any liability for the information presented. All formulations are provided in good faith, but no warranty is given as to accuracy of information or results, or suitability for a particular use, nor is freedom from patent infringement to be inferred. Formulations are offered solely for consideration by the participating manufacturers. Continued use of this web site infers acceptance of this disclaimer.
Latest Issues
At The FOREFRONT
Everything started at the forefront of sea explorations, between the Varde and Grouin headlands, on the edge of Brittany, a vantage point that affords broad views and a look out to sea. The sea is at the same time our source of inspiration and our primary source of creation.
At the forefront of innovation, we never stop...
in-cosmetics Global 2025
RAI Amsterdam
8th - 10th April 2025
CITE JAPAN 2025
Pacifico Yokohama
14th - 16th May 2025
