W/O Massage Emulsion (PEG- And Paraffin Oil Free) 15.4

Hydrior AG
Phase
Product
INCI Name
Supplier
Volume
A
HYDRIOL® PGI
Polyglyceryl-4 Isostearate)
2.0
HYDRIOL® PGR
(Polyglyceryl Polyricinoleate)
1.0
Aluminium stearate
Aluminium stearate
0.20
Paracera® MW
(Cera Microcristallina)
3.0
Soya oil
(Glycine Soja)
10.0
Almond oil
(Prunus Dulcis)
10.0
Caprylic/Capric Triglyceride
(Caprylic/Capric Triglyceride)
10.0
Oxynex® 2004
Propylene Glycol (and) BHT (and) Ascorbyl Palmitate (and) Glyceryl Stearate (and) Citric Acid)
0.02
PCL-Liquid®
(Cetearyl Ethylhexanoate (and) Isopropyl Myristate)
5.0
B
Glycerol
(Glycerin)
3.0
Magnesium sulfate · 7 Hydrate
(Magnesium Sulfate)
0.70
Rokonsal® LJ
(Benzyl Alcohol (and) PPG-2 Methyl Ether (and) 2-Bromo-2-Nitropropane-1,3-Diol (and) Deceth-8 (and) Iodopropynyl Butylcarbamate)
0.05
Water deion.
(Water)
54.73
Perfume
(Parfum)
0.30

Preparation:

Weight in all ingredients for the oil phase and heat up to approx. 80 °C. Add the aqueous phase within approx. 20 minutes while stirring. Hold the temperature at least at 70°C. After the addition of the aqueous phase cool the mixture down to 50 - 60 °C. Homogenize with a rotor/stator system at approx. 10'000 rpm for two minutes and for a further minute after cooling down to approx. 35 °C. Add the perfume. The emulsion can be bottled after cooling down to 25 °C.

Notes:

Properties Liquid emulsion; skin absorption time: approx. 50".
Disclaimer

While every effort has been made to reproduce these formulations correctly, the Publisher of this website cannot accept any liability for the information presented. All formulations are provided in good faith, but no warranty is given as to accuracy of information or results, or suitability for a particular use, nor is freedom from patent infringement to be inferred. Formulations are offered solely for consideration by the participating manufacturers. Continued use of this web site infers acceptance of this disclaimer.

Latest Issues

SNF

SNF, headquartered in Andrézieux, France, is a leading global producer of water-soluble polymers with primary manufacturing sites in France, the USA, and China. In 2024, SNF reported a turnover of $5.1 billion. Over the last 40 years, SNF has developed expertise in polymer chemistries designed for specialty markets, such as personal care and...

Learn more »

Connex-C Asia 2025

Lee Kong Chian School of Medicine - Ong Tiong Tat and Irene Tan Liang Kheng Auditorium 11 Mandalay Road, Level 4, Singapore 308232
31 July - 1 August 2025

IFSCC Congress 2025

Palais des Festivals, Cannes
15th - 18th September 2025