W/O Massage Emulsion(PEG- And Paraffin Oil Free) 15.3
Hydrior AG
Preparation:
Weight in all ingredients for the oil phase and heat up to approx. 80 °C. Add the aqueous phase within approx. 20 minutes while stirring. Hold the temperature at least at 70°C. After the addition of the aqueous phase cool the mixture down to 50 - 60 °C. Homogenize with a rotor/stator system at approx. 10'000 rpm for two minutes and for a further minute after cooling down to approx. 35 °C. Add the perfume. The emulsion can be bottled after cooling down to 25 °C.Notes:
Properties Liquid emulsion; skin absorption time: approx. 1' 30''.Disclaimer
While every effort has been made to reproduce these formulations correctly, the Publisher of this website cannot accept any liability for the information presented. All formulations are provided in good faith, but no warranty is given as to accuracy of information or results, or suitability for a particular use, nor is freedom from patent infringement to be inferred. Formulations are offered solely for consideration by the participating manufacturers. Continued use of this web site infers acceptance of this disclaimer.
Latest Issues
Vantage Specialty Ingredients, formerly Lipo Chemicals, is the personal care unit of Vantage Specialty Chemicals, offering a wide array of specialty, basic, and naturally derived ingredient solutions to marketers of formulated skin and hair care products.
Founded in 1962 and acquired by Vantage Specialty Chemicals in 2010, Vantage s is a...
in-cosmetics Latin America 2024
São Paulo, Brazil
25th - 26th September 2024
IFSCC 2024
Recanto das Cataratas Thermas Resort, Iguazu Falls, Brazil
14th - 17th October 2024