O/W Skin Cream With Jojoba Oil 10.4
Hydrior AG
Preparation:
Weight in all ingredients for the oil phase according the sequence above and heat the mixture up to 80 °C during stirring. Add the mixture to the aqueous phase without stirring at 70 - 80 °C. Stir shortly at 70 °C and homogenize for 3 minutes with a rotor / stator system at approx. 10'000 rpm. Cool down to 25 °C and add the perfume. Homogenize again for 1 - 2 minutes with the rotor / stator system. Remark: Add Rhodicare® T after preparing the aqueous phase under strong stirring until the mixture is homogeneous. Remove the air with vacuum if possible.Notes:
Properties This unique formulation is quickly absorbed and leaves a skin feeling sensationally soft and supple.Disclaimer
While every effort has been made to reproduce these formulations correctly, the Publisher of this website cannot accept any liability for the information presented. All formulations are provided in good faith, but no warranty is given as to accuracy of information or results, or suitability for a particular use, nor is freedom from patent infringement to be inferred. Formulations are offered solely for consideration by the participating manufacturers. Continued use of this web site infers acceptance of this disclaimer.
Latest Issues
We make beauty natural.
Lipoid Kosmetik is a leading manufacturer of natural raw materials for the cosmetic and personal care industry. High-quality botanical actives and extracts (Lipoid Kosmetik AG, Switzerland) as well as pharma grade natural lecithins and phospholipids (Lipoid GmbH, Germany) are part of our sophisticated portfolio.
SEPAWA Congress 2025
ECC Estrel Center, Berlin
15-17th October 2025
California Chapter Suppliers’ Day 2025
Long Beach Convention Center
29th - 30th October 2025
