‘GET PHYSICAL’ MOISTURISING SUN PROTECTION CREAM (SPF-28 In Vitro)
Preparation:Combine phase A in the order listed with medium propeller mixing at 20-25°C. Mix until uniform (1-2 min). Add phase B to phase A and mix with a high shear mixer at medium speed until homogenous (2-3 min) at 20-25°C. Add Phase C to batch continue mixing with a high shear mixer at medium speed until batch is uniform. Combine phase D in order listed with medium prop mixing at 20-25°C. Mix until uniform (2-3 min). Slowly add phase D to combined phases ABC with medium shear mixing, increase the shear speed as the solution starts to build viscosity. Mix for 3-4 minutes or until batch is homogeneous. Transfer to closed container.
Notes:Properties Appearance (@25°C): white, semi-solid pH: 5-7 Viscosity (@ 25°C): 15,000-30,000 cps (spindle #6, 10 rpm, 1 min.) Suppliers 1 Presperse 2 Jeen International 3 Biotech Marine 4 Dow Corning 5 Degussa 6 JGC Catalysts & Chemical 7 Micro Powders 8 Schülke
While every effort has been made to reproduce these formulations correctly, the Publisher of this website cannot accept any liability for the information presented. All formulations are provided in good faith, but no warranty is given as to accuracy of information or results, or suitability for a particular use, nor is freedom from patent infringement to be inferred. Formulations are offered solely for consideration by the participating manufacturers. Continued use of this web site infers acceptance of this disclaimer.