‘FILL ME IN’ WRINKLE TREATMENT LOTION
Presperse LLC
Preparation:
Combine phase A in the order listed with medium prop mixing at 20-25°C. Mix until uniform (1-2 min). Pre-disperse phase B for best results. Combine phase B and mix with a high shear mixer and homogenise until uniform at 20-25 °C. Add phase B to phase A and mix with a high shear mixer at medium speed until homogenous (2-3 min) at 20-25°C. Add phase C to combined phases AB and mix until homogenous. Combine phase D in order listed with medium prop mixing at 20-25°C. Mix until uniform (2-3 min). Add phase D to combined phases ABC slowly and mix with a high shear mixer. Mix for 3-4 minutes at high speed, high shear at 20-25°C. Transfer to closed container.Notes:
Properties Appearance (@25°C): white, opaque, semi-solid Viscosity (@25°C): 15,000-30,000 cps (#6, 10 rpm, 1 min.) Suppliers 1 Presperse 2 Penreco 3 Dow Corning 4 Degussa 5 Ganz Chemical Co. 6 Micro Powders 7 Biotech Marine 8 Phoenix Chemical 9 SchülkeDisclaimer
While every effort has been made to reproduce these formulations correctly, the Publisher of this website cannot accept any liability for the information presented. All formulations are provided in good faith, but no warranty is given as to accuracy of information or results, or suitability for a particular use, nor is freedom from patent infringement to be inferred. Formulations are offered solely for consideration by the participating manufacturers. Continued use of this web site infers acceptance of this disclaimer.
Latest Issues
At CLR, we have the consumer in mind right from the start of the development of our active ingredients. We analyze which skin problems consumers have and develop solutions. Our aim is not to serve short-lived trends, but to improve people’s well-being and quality of life. With all our expertise, we create active ingredients that are highly...
in-cosmetics Korea 2025
COEX, Seoul
2nd - 4th July 2025
Breakthrough Science & Claims Testing - The SCS Annual Conference
Royal College of Surgeons of England, London
2 - 3 July