RESTORATIVE BIONIGHT CREME (COLD EMULSION)
Hallstar
Preparation:
Applying no heat to either phase whatsoever, emulsify phase B into phase A under a high sheer Homogeniser with tight yield mesh screen on high rpm. Let mix until white shiny cream starts to form and add phase C, one component at a time. Mixing might be best done in cooling vessel to minimise heat degradation of actives due to heat formation from sheering of the cream. Phase D should be mixed together as a sub-phase thoroughly after Cremophor has been warmed until clear. Add fragrance and Cremophor mix to batch while mixing thoroughly. Cool to room temperature.Disclaimer
While every effort has been made to reproduce these formulations correctly, the Publisher of this website cannot accept any liability for the information presented. All formulations are provided in good faith, but no warranty is given as to accuracy of information or results, or suitability for a particular use, nor is freedom from patent infringement to be inferred. Formulations are offered solely for consideration by the participating manufacturers. Continued use of this web site infers acceptance of this disclaimer.
Latest Issues
At CLR, we have the consumer in mind right from the start of the development of our active ingredients. We analyze which skin problems consumers have and develop solutions. Our aim is not to serve short-lived trends, but to improve people’s well-being and quality of life. With all our expertise, we create active ingredients that are highly...
IFSCC Congress 2025
Palais des Festivals, Cannes
15th - 18th September 2025
SEPAWA Congress 2025
ECC Estrel Center, Berlin
15-17th October 2025
