COLD PROCESS SOAP USING EXOTIC BUTTERS & OILS (For Oily To Normal Skin)
Hallstar
Preparation:
Prepair moulds and any other ingredients in advance. Dissolve lye in the distilled water, adding the lye slowly to the water. (The lye will react immediately with the water and get very hot!) Allow mixture cool to 55°C. Heat oils to 55°C. Melt the exotic butters with the oils separately from water/lye mixture until clarified (approximately 55°C max). Once the lye solution and the oil/butter mixture reaches 55°C separately, carefully add the lye solution to the oil/butter mixture; stir until trace (thick slurry). This stirring process can take up to 1 hour using a mixer. At trace add the essential oil. Stir to mix thoroughly and pour into moulds. Insulate with covers and let rest undisturbed for 24 hours. Unmould and cut into desired shapes. Let cure for at least 3 to 5 weeks.Disclaimer
While every effort has been made to reproduce these formulations correctly, the Publisher of this website cannot accept any liability for the information presented. All formulations are provided in good faith, but no warranty is given as to accuracy of information or results, or suitability for a particular use, nor is freedom from patent infringement to be inferred. Formulations are offered solely for consideration by the participating manufacturers. Continued use of this web site infers acceptance of this disclaimer.
Latest Issues
About Us
Our team is here to understand your challenges and help you reach the next level
Founded in 2018 in Portugal, a country with a deep connection to the sea, we set out to redefine marine biotechnology by harnessing the ocean’s untapped potential.
At Ínclita Seaweed Solutions (ISS), we believe seaweed holds the key to a...
CITE JAPAN 2025
Pacifico Yokohama
14th - 16th May 2025
NYSCC Suppliers' Day 2025
Javits Center, New York
3rd - 4th June 2025
