EASY SPREADING O/W SUN CREAM

BASF
Phase
Product
INCI Name
Supplier
Volume
A
EMULGADE®
4,5
Amphisol K
1,0
CUTINA®
1,0
GMS-V
3,0
EUTANOL® G 16
8,0
MYRITOL® 331
2,0
CETIOL® OE
1,0
Neo Heliopan
7,0
Eusolex 6300
3,0
B
Zinc Oxide
7,0
neutral (H&R)
1,5
Keltrol T
0,5
C
Glycerin
3,0
Water
57,35
D
Citric Acid 50%ig
0,15
Preservative
q.s.
pH-valu
7,1
Viscosity (mPas), Brook.RVF, 23°C,sp.TE, 4 rpm
225000

Preparation:

Heat the phase I to 80-85°C. Add the phase II while stirring. Heat the phase III to 80-85°C and add the phase to the 80°C heated oil phase while stirring. Homogenise the emulsion at 60°C. Add the phase IV at 35°C. The pH value must be at 7,1-7,5.
Disclaimer

While every effort has been made to reproduce these formulations correctly, the Publisher of this website cannot accept any liability for the information presented. All formulations are provided in good faith, but no warranty is given as to accuracy of information or results, or suitability for a particular use, nor is freedom from patent infringement to be inferred. Formulations are offered solely for consideration by the participating manufacturers. Continued use of this web site infers acceptance of this disclaimer.

Latest Issues

Connex-C Asia 2025

Lee Kong Chian School of Medicine - Ong Tiong Tat and Irene Tan Liang Kheng Auditorium 11 Mandalay Road, Level 4, Singapore 308232
31 July - 1 August 2025

IFSCC Congress 2025

Palais des Festivals, Cannes
15th - 18th September 2025