PHYSICAL SUNSCREEN STICK

Jeen International Corporation
Phase
Product
INCI Name
Supplier
Volume
A
Jeecol® PMA-3
PPG-3 Myristal Ether
53.4
B
Jeesperse® ZOTN-65
Zinc Oxide (and) C12-15 Alkyl Benzoate
20.0
Jeenate® 3H
Polyethylene
3.0
Jeenate® 5H
Polyethylene
7.5
Jeesperse® T50 TN
Titanium Dioxide (and) C12-15 Alkyl Benzoate
10.0
Jeechem® TISC
Triisostearyl Citrate
5.0
Jeecide® CAP-2
Caprylyl Glycol (and) Phenoxyethanol (and) Hexylene Glycol
0.5
C
Vitamin E Acetate
Tocopheryl Acetate
0.5
Cranberol
Cranberry Seed Oil
0.1

Preparation:

Phase A: Heat the Jeecol PMA-3 to 75-80°C. Add in phase B oil soluble ingredients and mix until uniform. Homogenising agitation may be required to fully disperse the powders. Cool the batch to 55-60°C and add in phase C. Pour product into stick containers and allow to harden. Properties This stick is non-whitening and leaves a dry silky feel upon application.
Disclaimer

While every effort has been made to reproduce these formulations correctly, the Publisher of this website cannot accept any liability for the information presented. All formulations are provided in good faith, but no warranty is given as to accuracy of information or results, or suitability for a particular use, nor is freedom from patent infringement to be inferred. Formulations are offered solely for consideration by the participating manufacturers. Continued use of this web site infers acceptance of this disclaimer.

Latest Issues

Connex-C Asia 2025

Lee Kong Chian School of Medicine - Ong Tiong Tat and Irene Tan Liang Kheng Auditorium 11 Mandalay Road, Level 4, Singapore 308232
31 July - 1 August 2025

IFSCC Congress 2025

Palais des Festivals, Cannes
15th - 18th September 2025