LIPSTICK
Wacker-Chemie AG
Preparation:
Heat the oils of phase A to 90°C while stirring, add the resin and wait until the solution becomes homogenious. Add the waxes of phase B and keep temperature at 90°C. Add the pigment pre-mix (phases C and D) and stir in a water bath at 90°C for approx. 15 minutes. Pour in special moulds. Pigment pre-mix: Heat phase D to 80°C while stirring. Add the pigments of phase C and homogenise well on a three-roll-mill. Suppliers 1 Degussa AG 2 Merck-Schuchardt 3 Uniqema 4 Wacker Chemie AG 5 Kahl & Co 6 Kramer & Martin Pharma Handels GmbH 7 LCW 8 Merck KGaA 9 Henry Lamotte GmbH 10 ISPDisclaimer
While every effort has been made to reproduce these formulations correctly, the Publisher of this website cannot accept any liability for the information presented. All formulations are provided in good faith, but no warranty is given as to accuracy of information or results, or suitability for a particular use, nor is freedom from patent infringement to be inferred. Formulations are offered solely for consideration by the participating manufacturers. Continued use of this web site infers acceptance of this disclaimer.
Latest Issues
Good Face Project is beauty’s only cloud-based, AI-powered Formulation, Regulatory Compliance, and PLM Software. Since 2018, Good Face has been building the world's largest centralized International Nomenclature Cosmetic Ingredient (INCI) database which encompasses up-to-date scientific research, worldwide regulations, retail policies and...
in-cosmetics Global 2025
RAI Amsterdam
8th - 10th April 2025
CITE JAPAN 2025
Pacifico Yokohama
14th - 16th May 2025
