BE COOL

Croda Europe Limited

Phase

Product

INCI Name

Supplier

Volume

Arlamol HD1

Isohexadecane

5.00

Crodamol IPM1

Isopropyl Myristate

4.00

Arlamol E1

PPG-15 Stearyl Ether

3.00

Super Sterol Ester1

C10-30 Cholesterol/Lanosterol Esters

2.00

Arlacel P-1351

PEG-30 dipolyhydroxystearate

1.00

Vitamin E Acetate

Tocopheryl Acetate

0.50

Deionised water

Aqua

To 100

Pricerine 90911

Glycerine, Magnesium Sulphate Heptahydrate

4.50, 0.80

Euxyl PE90102

Phenoxyethanol (and) Ethylhexylglycerin, Lactic acid

0.80, To 5.5-6.0

Preparation:

This water-in-oil cream has an innovative emulsification system, incorporating Arlamol P-135, which delivers a cool rush of moisture on application to the skin. Super Sterol Ester gives natural repair and protection benefits.

Notes:

Combine oil phase and heat to 60°C. Cool to 35°C. Combine water phase and heat to 35°C. Slowly add the water to oil phase with fast stirring. Stir in Euxyl PE9010. Homogenised for 2 minutes per 100g. Check pH and adjust with lactic acid if necessary.

Disclaimer

While every effort has been made to reproduce these formulations correctly, the Publisher of this website cannot accept any liability for the information presented. All formulations are provided in good faith, but no warranty is given as to accuracy of information or results, or suitability for a particular use, nor is freedom from patent infringement to be inferred. Formulations are offered solely for consideration by the participating manufacturers. Continued use of this web site infers acceptance of this disclaimer.

Latest Issues

Featured Supplier

At CLR, we have the consumer in mind right from the start of the development of our active ingredients. We analyze which skin problems consumers have and develop solutions. Our aim is not to serve short-lived trends, but to improve people’s well-being and quality of life. With all our expertise, we create active ingredients that are highly...

Learn more »