ANTIPOLLUTION SKIN FACE
Hallstar Italia Srl
Preparation:
Procedure Prepare phase A and B separately, disperse the polymer in the water phase using a suitable dispersion unit (e.g. Silverson/Ultra-Turrax/…) then warm it up to 75°C. Add phase A to phase B under agitation at 75°C, homogenise for few minutes. Cool down the temperature, under gentle stirring. Add phase C below 40°C. Properties Viscosity: 11,000–15,000 mPa.s Brookfield RVDV-E, spindle 5, 20 rpm pH (100%): 5.5–6.0Disclaimer
While every effort has been made to reproduce these formulations correctly, the Publisher of this website cannot accept any liability for the information presented. All formulations are provided in good faith, but no warranty is given as to accuracy of information or results, or suitability for a particular use, nor is freedom from patent infringement to be inferred. Formulations are offered solely for consideration by the participating manufacturers. Continued use of this web site infers acceptance of this disclaimer.
Latest Issues
At CLR, we have the consumer in mind right from the start of the development of our active ingredients. We analyze which skin problems consumers have and develop solutions. Our aim is not to serve short-lived trends, but to improve people’s well-being and quality of life. With all our expertise, we create active ingredients that are highly...
in-cosmetics Global 2025
RAI Amsterdam
8th - 10th April 2025
CITE JAPAN 2025
Pacifico Yokohama
14th - 16th May 2025
