SKIN BRIGHTENING LOTION – PARABEN-FREE J3/11B
Preparation:Procedure Add D.I. Water and sprinkle in Ultrez® 10 under propeller mixing. Heat phase A to 70°C. Add phase B ingredients and maintain batch temperature at 70-75°C. When phases are at temperature, homogenise phase A and B for 10 min. Switch to prop. Pre-mix phase C in a side vessel using prop agitation until it is smooth and uniform and free of any lumps. Cool batch to 55-60°C and add phase C using a homomixer. (Caution: Ensure this phase is not added above this temperature so that none of the volatile cyclomethicone flashes off). When uniform, change to sweep and add phase D slowly. Pre-mix phase E in a side vessel. Cool batch to 45°C and add phase E. Pre-mix phase F. Warm to effect solution. Add to the batch. Cool the batch to room temperature and adjust pH with 10% Citric Acid to 5.0 – 6.0. Properties JEESILC® PS-CM is a non-crosslinked silicone copolymer. JEECIDE® CAP-5 is a globally-approved broad spectrum paraben-free preservative system effective against bacteria, yeast and mould. JEECHEM® FS-102 is a cost-effective fragrance solubiliser. Botanagen C is a stable form of Vitamin C.
Notes:Suppliers 1 Noveon 2 JEEN International Corp. 3 Botanicals’ Plus
While every effort has been made to reproduce these formulations correctly, the Publisher of this website cannot accept any liability for the information presented. All formulations are provided in good faith, but no warranty is given as to accuracy of information or results, or suitability for a particular use, nor is freedom from patent infringement to be inferred. Formulations are offered solely for consideration by the participating manufacturers. Continued use of this web site infers acceptance of this disclaimer.