ANTI-AGEING DAY CREAM O/W 30/CLFCE 4739/05

Phase
Product
INCI Name
Supplier
Volume
A
Emulsiphos® (677660)
Potassium Cetyl Phosphate, Hydrogenated Palm Glycerides
1
1.00
PCL-Liquid 100 (660089)
Cetearyl Ethylhexanoate
1
1.00
Tegosoft TN
C12-15 Alkyl Benzoate
2
3.00
Neutral Oil (162412)
Caprylic/Capric Triglyceride
1
8.00
Copherol 1250
Tocopheryl Acetate
3
0.50
Lanette O
Cetearyl Alcohol
3
2.00
PCL-Solid (660086)
Stearyl Heptanoate, Stearyl Caprylate
1
1.00
Dow Corning 246 Fluid
Cyclohexasiloxane
4
2.00
Neo Heliopan® BB (116210)
Benzophenone-3
1
2.00
Neo Heliopan® HMS (182573)
Homosalate
1
5.00
Edeta BD
Disodium EDTA
5
0.10
Carbopol ETD 2050
Carbomer
6
0.30
Keltrol T
Xanthan Gum
7
0.10
B
Water Distilled
Water (Aqua)
60.70
Glycerin 99,5 P.
Glycerin
3.00
IBR-dormin® (158383)
Water (Aqua), Narcissus Tazetta Bulb Extract
1
2.00
Neo Heliopan® Hydro (103089) used as a 30% aq. solution neutralised with Triethanolamine
Phenylbenzimidazole Sulfonic Acid
1
5.00
C
Triethanolamine 99 %
Triethanolamine
1.00
D
Symdiol® 68 (108580)
1,2-Hexanediol, Caprylyl Glycol
1
1.00
E
Fragrance
Parfum
1
0.20
SymRelief® (170015)
Bisabolol, Zingiber Officinale (Ginger) Root Extract
1
0.10
SymGlucan® (151719)
Water (Aqua), Glycerin, Beta-Glucan
1
1.00

Preparation:

Procedure Production in a Becomix Mini Lab RW 2,5: Phase A: Heat up to 85°C (without Carbopol nd Keltrol) until all ingredients completely dissolved. Transfer into the preheated Becomix, add Carbopol and Keltrol and homogenise. (Heating 85°C, Stirrer 1 m/S, Homogeniser 10m/s; 3 min, Vacuum -0.8 bar) Phase B: Heat on a hotplate to 85°C. Add Phase B to part A via the funnel. (Heating 85°C, Stirrer 1 m/S, Vacuum -0.8 bar) Phase C: Add directly via the funnel. Part D: Add directly to part A/B/C. Homogenise the product for 5 minutes. (Heating 85°C, Stirrer 1 m/S, Vacuum -0.5 bar, Homogeniser 10 m/s; 5 min) Cool down to ambient temperature. Phase E: At ambient temperature add Phase D and homogenise. Ventilate and remove the product with homogenising. (Stirrer 1 m/S, Vacuum -0.8 bar, Homogeniser 10 m/s; 5 min, Homogeniser 2 m/s; 3 min). The pH value of the finished product should be approx. 7.5 and has to be checked. Preparation of the 30% Neo Heliopan Hydro solution: 52.25% Water, demineralised 17.75% Triethanolamine 30.00% Neo Heliopan Hydro (103089) Dissolve two thirds of triethanolamine in water. Then add with stirring Neo Heliopan Hydro. Add the rest of triethanolamine until the solution becomes clear. The pH value of the finished Neo Heliopan Hydro solution should be 7.5 - 8.0 and has to be checked. For longer time of storage it is advisable to add preservatives (eg Parabens) to the solution. (For example: 6.67% of the 30% Neo Heliopan Hydro solution neutralised with triethanolamine equals 2% active.) Properties pH: 7.5

Notes:

Suppliers 1 Symrise GmbH & Co. KG 2 Degussa-Goldschmidt AG 3 Cognis Dtl. GmbH 4 Dow Corning GmbH 5 BASF AG 6 Noveon 7 CP-Kelco
Disclaimer

While every effort has been made to reproduce these formulations correctly, the Publisher of this website cannot accept any liability for the information presented. All formulations are provided in good faith, but no warranty is given as to accuracy of information or results, or suitability for a particular use, nor is freedom from patent infringement to be inferred. Formulations are offered solely for consideration by the participating manufacturers. Continued use of this web site infers acceptance of this disclaimer.