O/W - Sprayable Sun Protection
Preparation:1. Melt A at approx. 70°C. 2. Then add B to I. 3. Heat C to approx 70°C. 4. Prepare intermediate W/O emulsion: stir III into I with high speed dispersion tool (ultra turrax) about 2 min 5. Stir solution D into IV at room temperature and stir until cool (minimum 2 hours). 6. Stir E into IV and stir 1 hour.
Notes:This information is based on our present state of knowledge and is intended to provide general notes on our products and their uses. It should not therefore be construed as guaranteeing specific properties of the product described or their suitability for a particular application. Any existing industrial property rights must be observed. The quality of our products is guaranteed under our General Conditions of Sale.
While every effort has been made to reproduce these formulations correctly, the Publisher of this website cannot accept any liability for the information presented. All formulations are provided in good faith, but no warranty is given as to accuracy of information or results, or suitability for a particular use, nor is freedom from patent infringement to be inferred. Formulations are offered solely for consideration by the participating manufacturers. Continued use of this web site infers acceptance of this disclaimer.