POST DEPILATORY LOTION O/W 30/CLSVG 4961/00
Symrise Pte Ltd
Preparation:
Procedure Mix Phase A and B separately, without Carbopol and Keltrol, and heat up to 80°C. Disperse Keltrol and Carbopol in Phase A. Now blend Phase B without stirring to Phase A and homogenise. While homogenising add Phase C. Allow to cool down while stirring. Add Phase D at approx. 45°C and Phase E at room temperature. Properties pH: 5.8 Viscosity: 0.001 1/s - eta= 2257 Pas 5 1/s - eta= 9 Pas Rheology-Instrument: Haake RS1, sensor: PP 60/Ti, gap= 1.500 mm, T= 20°C, Controlled Stress Suppliers 1 Symrise GmbH & Co. KG 2 Cognis Dtl. GmbH 3 Degussa-Goldschmidt AG 4 Noveon 5 CP-KelcoDisclaimer
While every effort has been made to reproduce these formulations correctly, the Publisher of this website cannot accept any liability for the information presented. All formulations are provided in good faith, but no warranty is given as to accuracy of information or results, or suitability for a particular use, nor is freedom from patent infringement to be inferred. Formulations are offered solely for consideration by the participating manufacturers. Continued use of this web site infers acceptance of this disclaimer.
Latest Issues
At The FOREFRONT
Everything started at the forefront of sea explorations, between the Varde and Grouin headlands, on the edge of Brittany, a vantage point that affords broad views and a look out to sea. The sea is at the same time our source of inspiration and our primary source of creation.
At the forefront of innovation, we never stop...
NYSCC Suppliers' Day 2025
Javits Center, New York
3rd - 4th June 2025
17th Sun Protection Conference 2025
Royal College of Physicians, London
24 - 25 June 2025
