ANTI-ACNE GEL

FORMULATION EXAMPLE WITH SEBORILYS
Phase
Product
INCI Name
Supplier
Volume
A
Aqua
Eau
q.s.
EDETA BD
Disodium EDTA
BASF
0.1
Carbopol EDT 2020
Acrylate/C10-30 alkyl acrylate crosspolymer
BF Goodrich
0.5
Biowax Liquid 754
Dimethicone Copolyol
Biosil Technologies
1.0
Liponic EG1
Glycereth-26
Lipo Chemicals
2.0
Propylene Glycol
Propylene Glycol
6.0
TEA (99%)
Triethanolamine
0.2
Plantacare 2000
Decyl Glucoside
Henkel
6.0
Phenonip
Phenoxyethanol and methylparaben and butylparaben and propylparaben.
NIPA
1.0
SEBORILYS
Greentech
5.0
Fragrance
q.s.

Preparation:

Procedure Phase A is prepared by mixing and heating deionised water and EDETA BD to 75°C. At 75°C disperse Carbopol EDT2020 Reduce mixing speed after polymer is dispersed. When dispersed, add Biowax Liquid 754,Liponic EG1 and Propylene Glycol. Mix until uniform. Allow any air bubbles to rise to surface before neutralising batch. Partially neutralise batch with given amount of TEA. When uniform, add Plantacare 2000, and Phenonip When dispersed, add SEBORILYS to the batch Mix until batch clears. Add fragrance if desired.

Notes:

Disclaimer

While every effort has been made to reproduce these formulations correctly, the Publisher of this website cannot accept any liability for the information presented. All formulations are provided in good faith, but no warranty is given as to accuracy of information or results, or suitability for a particular use, nor is freedom from patent infringement to be inferred. Formulations are offered solely for consideration by the participating manufacturers. Continued use of this web site infers acceptance of this disclaimer.