DAILY CARE CREME WITH SUN PROTECTION FACTOR 8*
Preparation:Prepare the phase A, by incorporating all the ingredients, then stir under moderate speed and heat till 75°C. Prepare the phase B and heat it till 75°C.At this temperature, poor the phase B into the phase A under progressive stirring speed. Below 65°C, add separately the ingredients of the phase C. Let cool down under moderate stirring till 40°C, then check and adjust the pH with sodium hydroxide. Homogenise 30 sec at 16 000rpm.
Notes:Technical Data pH value 5.50 - 6.00 Appearance white and bright Viscosity (Brookfield DVIII+LV 3/4rpm) 22000 - 25000 mPas *in vitro SPF measurement
While every effort has been made to reproduce these formulations correctly, the Publisher of this website cannot accept any liability for the information presented. All formulations are provided in good faith, but no warranty is given as to accuracy of information or results, or suitability for a particular use, nor is freedom from patent infringement to be inferred. Formulations are offered solely for consideration by the participating manufacturers. Continued use of this web site infers acceptance of this disclaimer.