CLEAR GEL WITH PERMETHYL 102 A

Phase
Product
INCI Name
Supplier
Volume
A
Deionized Water
Water
38.00
B
Permethyl® 102A
Isoeicosane
Presperse, Inc.
14.00
Polychol 15
Laneth-15
Croda
30.00
Liponate IPP
Isopropyl Palmitate
Lipo
7.00
Ritachol
Mineral Oil (and) Lanolin Alcohol
RITA Corporation
5.00
C
Polyethylene Glycol 200
PEG-4
5.00
D
Germaben II
Propylene Glycol (and) Diazolidinyl Urea (and) Methylparaben (and) Propylparaben
ISP
1.00

Preparation:

Procedure 1. Heat Phase A to 80-82°C, heat Phase B to 82°C. 2. Mix well until melted, then add Phase C into Phase B. Mix until uniform. 3. Slowly add mixture of Phase B and C to Phase A. 4. Mix thoroughly but gently, then add Phase D. 5. Cool with slow agitation. Avoid air entrapment.

Notes:

Disclaimer

While every effort has been made to reproduce these formulations correctly, the Publisher of this website cannot accept any liability for the information presented. All formulations are provided in good faith, but no warranty is given as to accuracy of information or results, or suitability for a particular use, nor is freedom from patent infringement to be inferred. Formulations are offered solely for consideration by the participating manufacturers. Continued use of this web site infers acceptance of this disclaimer.