MOISTURISING BODY WASH
Purac Asia Pacific Pte Ltd
Preparation:
Procedure 1. Add Manro BES 70 in the heated water at 70°c under stirring and stir until homogeneous. (phase A) 2. Add Arlatone SCI with continuous stirring till homogeneous, then stop heating. 3. Add the remaining ingredients in the order listed 4. Heat B to 70°c and stir until absolute soluble. 5. Add B to A under stirring then add C and D in the order listed. Stir until homogeneous.Disclaimer
While every effort has been made to reproduce these formulations correctly, the Publisher of this website cannot accept any liability for the information presented. All formulations are provided in good faith, but no warranty is given as to accuracy of information or results, or suitability for a particular use, nor is freedom from patent infringement to be inferred. Formulations are offered solely for consideration by the participating manufacturers. Continued use of this web site infers acceptance of this disclaimer.
Latest Issues
We believe that it's possible to replace synthetic raw materials in cosmetic formulations, without compromise. Our easy-to-use, naturally-derived blends are created using safe, raw materials and provide high-performance alternatives to synthetic products.
Details of our full product range can be viewed here.
Interested in our products? ...
IFSCC Congress 2025
Palais des Festivals, Cannes
15th - 18th September 2025
SEPAWA Congress 2025
ECC Estrel Center, Berlin
15-17th October 2025