Eye Gel With HALOXYL™ SED0308383 D1t
Preparation:Part A: sprinkle Ultrez 10 in the water and allow to swell for 15 minutes. Heat Part B to 60°C until dissolved and allow to cool to around 40°C. Add Part C to Part B, homogenize. Add Part B+C to Part A with helix stirring (s=300). Allow to swell for 1 hour. Add Part D, then Part E to the previous part. Homogenize. Neutralize with Part F and allow to swell for 1 hour. Add Part G to previous part, then add Part H. Mix well, check pH at 7 +/- 0.2 (I pH = 6.3) pH: 6.8
Notes:Non-warranty This formulation has been subject to limited stability tests and has been shown to perform well. However formulators adopting this approach should ensure to their own satisfaction long term stability and functionality. It is good practice to conduct safety tests on all final formulations prior to marketing. Suggested uses should not be taken as an inducement to infrige any existing patents.
While every effort has been made to reproduce these formulations correctly, the Publisher of this website cannot accept any liability for the information presented. All formulations are provided in good faith, but no warranty is given as to accuracy of information or results, or suitability for a particular use, nor is freedom from patent infringement to be inferred. Formulations are offered solely for consideration by the participating manufacturers. Continued use of this web site infers acceptance of this disclaimer.