CLEAR FACE WASH WITH 2% SALICYLIC ACID

Stepan Company
Salicylic Acid Acne Treatment with STEPAN-MILD® L3
Phase
Product
INCI Name
Supplier
Volume
A
D.I. Water
q.s. 100.00
Propylene Glycol
2.0
Sodium C14-16 Olefin Sulfonate
BIO-TERGE® AS-40 CG-P
26.00
Lauryl Lactyl Lactate
STEPAN-MILD® L3
2.00
B
Salicylic Acid
2.00
C
PEG-150 Distearate
STEPAN® PEG 6000 DS
1.50
D
Sodium Hydroxide, 50% solution
q.s.
Sodium Chloride
q.s.
E
Preservative, Dye, Fragrance
q.s.

Preparation:

Procedure In a suitable vessel equipped with heating and agitation capabilities, charge D.I. water, propylene glycol and BIO-TERGE®AS-40 CG-P. Start heating to 45-50°C with mixing. Add STEPAN-MILD® L3 with agitation. Continue heating to 45-50°C Mix until completely clear. Add salicylic acid with agitation. Mix until completely clear and everything is dissolved, while maintaining temperature at 45-5O°C. Add STEPAN® PEG 6000 DS with agitation. Mix until completely clear and everything is dissolved, while maintaining temperature at 45-50°C. Begin cooling to room temperature with agitation. Adjust pH with sodium hydroxide. Adjust viscosity with sodium chloride. Add preservatives, dye, fragrance if needed.
Disclaimer

While every effort has been made to reproduce these formulations correctly, the Publisher of this website cannot accept any liability for the information presented. All formulations are provided in good faith, but no warranty is given as to accuracy of information or results, or suitability for a particular use, nor is freedom from patent infringement to be inferred. Formulations are offered solely for consideration by the participating manufacturers. Continued use of this web site infers acceptance of this disclaimer.

Latest Issues

Connex-C Asia 2025

Lee Kong Chian School of Medicine - Ong Tiong Tat and Irene Tan Liang Kheng Auditorium 11 Mandalay Road, Level 4, Singapore 308232
31 July - 1 August 2025

IFSCC Congress 2025

Palais des Festivals, Cannes
15th - 18th September 2025