ALL NATURAL BODY WASH
Stepan Company
Preparation:
Procedure Into a suitable vessel equipped with mixing, heating and cooling capabilities, add D.I. water, STEPANOL® WA-Extra, STEPAN-MILD® SLL-FB and STEPAN-MILD® L3. Start mixing and heat to 130-135°F. When solution is clear, start cooling to room temperature. At 90°F add flax extract, mix well. Add preservatives, fragrance and dye, mix well. Adjust viscosity with sodium chloride and pH with sodium hydroxide or citric acid if necessary.Notes:
Supplier 1 Natunola HealthDisclaimer
While every effort has been made to reproduce these formulations correctly, the Publisher of this website cannot accept any liability for the information presented. All formulations are provided in good faith, but no warranty is given as to accuracy of information or results, or suitability for a particular use, nor is freedom from patent infringement to be inferred. Formulations are offered solely for consideration by the participating manufacturers. Continued use of this web site infers acceptance of this disclaimer.
Latest Issues
Founded in 1964, Sederma became a member of the Croda International Group in 1997. Sederma is dedicated to the development of active ingredients and in the creation of innovative concepts for Cosmetics, based on the mastery of biotechnology, fine chemistry and vegetal extraction.Located near Paris, all Sederma activities, from R&D and manufacturing...
IFSCC Congress 2025
Palais des Festivals, Cannes
15th - 18th September 2025
SEPAWA Congress 2025
ECC Estrel Center, Berlin
15-17th October 2025
