EASY-TO-WASH HAIR STYLING WAX
Preparation:Procedure PART A: Mix Ingredients, Heat Part A to 70-80°C. PART B: Mix ingredients, Heat Part B to 70-80°C until completely melted. Maintain temperature at 70-80°C for both PART A & B, and slowly add Part A to Part B with continuous mixing at 300-500 rpm. Mix until uniform. Allow batch to cool to 60-70°C. PART C: Pre-mix ingredients, add Part C to batch at 60-70°C. Mix until uniform. Neutralise batch with Part D. Continue cooling batch. Mix until uniform. When batch is at 50°C, add Part E ingredients one at a time. Continue mixing until uniform and batch has cooled to 40-45°C. Pour into desired containers at 40°C.
Notes:Properties Appearance: Glossy White to Off-white Waxy Cream pH value: 7.1 - 7.5 Viscosity: 160,000 - 190,000 mPas. Brookfield DV-II @ 20 rpm, #7 @ 40°C, measured @ 24 hours Stability: Passed 3 months @ 45°C, 5 cycles freeze/thaw Fixate® Superhold Polymer (%TS) 1.7 Suppliers 1 Sinopharm 2 Noveon Inc. 3 Fluka 4 Cognis 5 Sonneborn 6 Kahl & Co. 7 Well Special Wax Co. 8 BASF 9 Rita (16) 10 Rohm & Haas 11 Creation Aromatics
While every effort has been made to reproduce these formulations correctly, the Publisher of this website cannot accept any liability for the information presented. All formulations are provided in good faith, but no warranty is given as to accuracy of information or results, or suitability for a particular use, nor is freedom from patent infringement to be inferred. Formulations are offered solely for consideration by the participating manufacturers. Continued use of this web site infers acceptance of this disclaimer.