FUN-KY WET FIBERS
Preparation:Procedure Sprinkle Carbopol® Ultrez 21 Polymer on the surface of Deionised water and allow to wet. Begin gentle mixing. Partially neutralise Carbopol® Polymer dispersion with AMP-UltraTM PC 2000. Mix until uniform. Add PART B ingredients one at a time in order to the batch with mixing. Adjust pH to 6.8 - 7.2 with AMP-UltraTM PC 2000. Prepare PART C: mix glycol and water. Add slowly PEG-90M to the mix with strong agitation and slight heating, until homogeneous. Add PART C to the batch with mixing. Add dyes. Mix until uniform.
Notes:Properties Appearance: Stringy red opaque gel pH value: 6.8 - 7.2 Viscosity: 25,000 - 40,000 mPas. Brookfield RVT, spindle 6, 20 rpm, 25°C, measured after 24 hours High Humidity Curl Retention: 98% of original curl after 8 hours 98% of original curl after 24 hours (90% relative humidity, 25°C) Stability: Passed 2 months @ 45°C, 5 cycles freeze/thaw (in process) Suppliers 1 Noveon Inc. 2 Dow/Angus 3 VWR 4 Lonza 5 Rita (or) Dow/Amerchol
While every effort has been made to reproduce these formulations correctly, the Publisher of this website cannot accept any liability for the information presented. All formulations are provided in good faith, but no warranty is given as to accuracy of information or results, or suitability for a particular use, nor is freedom from patent infringement to be inferred. Formulations are offered solely for consideration by the participating manufacturers. Continued use of this web site infers acceptance of this disclaimer.