HAIR CONDITIONING MASK
Preparation:Procedure PART A: Sprinkle PEG-2M into water with stirring and heat into 80°C. Add Behentrimonium Chloride into water with mixing until uniform. Add Carbopol® Aqua CC polymer with mixing until water phase is homogenous PART B: Add Cetearyl Alcohol and Isopropyl isostearate, heat to 80°C Add PART B to PART A with high speed mixing for 5 minutes. Slow mixing to moderate speed and cool batch down to 60°C. Add silicone ingredients of PART C in order with good mixing for 5 minutes. Add citric acid to adjust pH to 4.5-5.0 when batch cools to 50°C. Add preservative and fragrance and mix until uniform
Notes:Properties Appearance: White Cream pH-value: 4.5-5.0 Viscosity: 15,000-17,000 mPas. Brookfield DV-II @ 20 rpm, #6 spindle @ 25°C, measured after 24 hours Stability: Passed 3 months @ 45°C and 5 cycles freeze/thaw Carbopol® Aqua CC Polymer Actives (wt.%) 0.2% Suppliers 1 Noveon Inc. 2 Clariant 3 Dow Chemical 4 Cognis 5 Dow Corning 6 Lonza 7 Charabot
While every effort has been made to reproduce these formulations correctly, the Publisher of this website cannot accept any liability for the information presented. All formulations are provided in good faith, but no warranty is given as to accuracy of information or results, or suitability for a particular use, nor is freedom from patent infringement to be inferred. Formulations are offered solely for consideration by the participating manufacturers. Continued use of this web site infers acceptance of this disclaimer.