MASCARA WITH PERMETHYL 284C
Preparation:Procedure In a suitable kettle, combine the Phase A ingredients one a time. Mix until all are completely dissolve. When Phase A are completely dissolve, heat to 75°C with a propeller mixer. When Phase A reach the temperature of 75°C, add the Phase B Black Iron Oxide disperse in 50% Butylene Glycol. Mix well. In a separate vessel, weigh the Phase C and begin heating to 80° – 85°C. Mix until all the waxes are completely melted and dissolved. When Phase C is at 80° – 85°C and uniform, slowly add to Phase A&B with adequate mixing. Mix for 15 minutes and begin slow cooling. Continue mixing the batch with a good agitation. When batch begins to thicken, switch to side wiper or paddle mixing. Continue cooling to 25°C When batch is at room temperature, stored in appropriate containers.
Notes:Suppliers 1 Kelco 2 RT Vanderbilt 3 Akzo Noble 4 ISP 5 Dow Chemical 6 Ruger Chemical 7 LCW 8 Ross 9 Lipo Chemicals 10 Uniqema Americas 11 Preperse Inc. 12 Symrise
While every effort has been made to reproduce these formulations correctly, the Publisher of this website cannot accept any liability for the information presented. All formulations are provided in good faith, but no warranty is given as to accuracy of information or results, or suitability for a particular use, nor is freedom from patent infringement to be inferred. Formulations are offered solely for consideration by the participating manufacturers. Continued use of this web site infers acceptance of this disclaimer.