SKIN SOFTENING CREAM

Phase
Product
INCI Name
Supplier
Volume
A
VANATURAL®
Bentonite
2.0
Water
72.2
Butylene Glycol
5.0
B
Dermalcare® GMS/SE
Glyceryl Stearate SE
1
9.0
CrodacolTM C-95 NF
Cetyl Alcohol
2
1.2
Neobee® M-5
Caprylic/Capric triglyceride
3
1.5
Finsolv® TN
C12-15 Alkyl Benzoate
4
4.6
Tegosoft® DO
Decyl Oleate
5
2.0
Abil® B 8843
PEG-14 dimethicone
5
0.5
Dow Corning 556 Cosmetic Grade Fluid
Phenyl Trimethicone
6
2.0
C
Preservative
Fragrance
qs

Preparation:

Procedure While heating the water to 75°C, slowly add the VANATURAL while mixing at maximum available shear. Mix until fully hydrated. Add the butylene glycol, mixing until uniform. Maintain the water phase at 75°C. Blend the Part B oil phase ingredients and heat to 75-80°C. Add the oil phase to the water phase with good agitation; mix until uniform. Cool with mixing; add Part C when the emulsion is <30°C.

Notes:

Suppliers 1 Rhodia 2 Croda 3 Stepan 4Finetex 5 Degussa Care Specialties/Goldschmidt 6 Dow Corning
Disclaimer

While every effort has been made to reproduce these formulations correctly, the Publisher of this website cannot accept any liability for the information presented. All formulations are provided in good faith, but no warranty is given as to accuracy of information or results, or suitability for a particular use, nor is freedom from patent infringement to be inferred. Formulations are offered solely for consideration by the participating manufacturers. Continued use of this web site infers acceptance of this disclaimer.