SCRUBBING FACIAL CLEANSER
Stepan Company
Preparation:
Procedure 1. Charge vessel with Deionized Water. Start agitation. 2. Slowly sprinkle in AQUA SF-1. Mix well. 3. Adjust pH to 5.8 - 6.2 with AMP 4. Add Glycerin, Steol CS-230, STEPAN® SLL-FB and STEPAN® SSL-CG. 5. Start heating the batch to 160 - 165°F. Hold this temperature for 15 - 20 minutes. 6. Start cooling to 80°F and add Lipo APS 40/60. 7. At 80°F add preservatives, fragrance and dye, if desired. Adjust pH to 5.5 - 6.0 with Citric Acid. Properties Appearance Clear with suspended particles pH, as is 6.5 - 7.0 Viscosity at 25°C 5,000 - 6,000 cps Temperature Stable (1 month at room) Stable (1 month at 50°C) Suppliers 1 Noveon 2 Dow 3 Lipo ChemicalNotes:
This formulation exfoliates the skin and leaves a velvety after-feel.Disclaimer
While every effort has been made to reproduce these formulations correctly, the Publisher of this website cannot accept any liability for the information presented. All formulations are provided in good faith, but no warranty is given as to accuracy of information or results, or suitability for a particular use, nor is freedom from patent infringement to be inferred. Formulations are offered solely for consideration by the participating manufacturers. Continued use of this web site infers acceptance of this disclaimer.
Latest Issues
Applied Science. Innovative Ingredients. Better Products. Naturally.
Biova provides water-soluble eggshell membrane (WSEM) ingredients to the dietary supplement, skin care and pet care industries. Eggshell membrane is a unique ingredient that provides many of the fundamental building blocks for skin and joint health. Naturally occurring...
in-cosmetics Global 2025
RAI Amsterdam
8th - 10th April 2025
CITE JAPAN 2025
Pacifico Yokohama
14th - 16th May 2025