Preparation:1. Charge Phase A in a suitable kettle. Heat to 80°C. 2. Add Phase B to Phase A in sequence, mixing well every each material addition. 3. Add Phase C to the batch. Mix until uniform. 4. Add Phase D to the batch. Mix until uniform. 5. Pour into suitable molder at 80°C-75°C.
While every effort has been made to reproduce these formulations correctly, the Publisher of this website cannot accept any liability for the information presented. All formulations are provided in good faith, but no warranty is given as to accuracy of information or results, or suitability for a particular use, nor is freedom from patent infringement to be inferred. Formulations are offered solely for consideration by the participating manufacturers. Continued use of this web site infers acceptance of this disclaimer.