Hair Pudding Mask
Gattefossé
Preparation:
- In main vessel weigh water phase A1 and heat to 70-72°C. Prepare oil phase B and heat to 70-72°C. - Add phase A2 into A1 and disperse under medium shear (1500rpm) with rotor stator. Ensure that everything is dispersed correctly. - Add phase A3 and mix well, keeping rotor stator to ensure that the gel is homogeneous. - Neutralize Microcare® Amine Stam with Lactic acid of phase A4. - Finish by adding phase A5, keeping rotor stator to ensure that the gel is homogeneous and all of phase A is homogeneous. - Proceed with emulsion of phase B into phase A under high shear (2500rpm) with rotor stator. Homogenize for 10-15 minutes. - Begin to cool down to 35°C under medium mixing. - Add Phase C and mix well. One can put a low to medium shear with rotor stator (1000-1500rpm) to ensure that the formula is smooth. - Adjust pH with phase D if necessary.Disclaimer
While every effort has been made to reproduce these formulations correctly, the Publisher of this website cannot accept any liability for the information presented. All formulations are provided in good faith, but no warranty is given as to accuracy of information or results, or suitability for a particular use, nor is freedom from patent infringement to be inferred. Formulations are offered solely for consideration by the participating manufacturers. Continued use of this web site infers acceptance of this disclaimer.
Latest Issues
Founded in 1964, Sederma became a member of the Croda International Group in 1997. Sederma is dedicated to the development of active ingredients and in the creation of innovative concepts for Cosmetics, based on the mastery of biotechnology, fine chemistry and vegetal extraction.Located near Paris, all Sederma activities, from R&D and manufacturing...
IFSCC Congress 2025
Palais des Festivals, Cannes
15th - 18th September 2025
SEPAWA Congress 2025
ECC Estrel Center, Berlin
15-17th October 2025
